A QR code that does not scan is worse than no code at all. The person in front of you tries twice, gives up and asks for your number anyway. The good news is that scanning problems almost always come from a handful of design choices. Get size, margin, contrast and placement right, and the code works on almost any recent phone.
Start with the card itself
A standard business card gives you very little room. Our cards use the ID-1 format from ISO/IEC 7810:2019, 85.6 × 54 mm, the same size as a bank card. That means every millimetre counts, and the QR code competes with your name, title and logo.
The simplest answer is to give the code its own face. Put your name, role and brand on the front. Put the QR code on the back, with a short label. That keeps the front clean and lets the code be as large as possible.
If you must share one face, keep the code in its own clear block. Do not wrap text around it or let a logo touch its edge.
How big should the QR code be?
There is no single minimum size that suits every code. What matters is the size of each module, the small square that the camera reads. The QR code standard, ISO/IEC 18004:2024, builds every code from these modules, and the more data a code holds, the more modules it needs.
Two things follow from that:
- Less data means larger modules. A dynamic code holds only a short web address, so its pattern stays simple. At the same printed size, each module is bigger than in a code packed with contact fields. Our guide to dynamic vs static QR codes explains why.
- Bigger is safer. On a business card, make the code as large as the layout allows. If the code has the back to itself, let it fill most of the card's height.
Do not trust the screen. A code that looks crisp on a monitor can be too small once printed. Print a proof at real size and scan it. Larger formats such as posters follow a distance rule; our guide to QR code size for signs and shop windows explains it.
The quiet zone: four modules of empty space
The quiet zone is the plain margin around the code. It tells the camera where the code starts and stops. ISO/IEC 18004:2024 sets it at four modules wide on all four sides.
Four modules is a minimum, not a target. More space is fine. Less space is where scanning problems begin.
Common ways designers break the quiet zone:
- Placing text, an icon or a URL right against the code.
- Framing the code with a tight border or a coloured box.
- Pushing the code to the edge of the card, so trimming cuts into the margin.
- Placing the code on a busy pattern or photo, so the margin is not truly plain.
If you need a frame, put it outside the quiet zone, never inside it.
Design rules at a glance
| Rule | Do | Avoid |
|---|---|---|
| Size | Make the code as large as the layout allows | Shrinking it to fit around other content |
| Quiet zone | Keep at least four clear modules on every side | Text, borders or edges touching the code |
| Contrast | Dark modules on a light background | Light-on-dark, pale tints, gradients |
| Placement | A flat, clear area, ideally its own face | Folds, edges, rounded corners, busy images |
| Data | A short dynamic link | Long contact blocks that make the code dense |
| Testing | A printed proof on several phones | Checking only on screen |
Contrast: dark on light
QR codes are designed to be read as dark modules on a light background. Keep to that. Black or a deep navy on white or a pale paper colour is the safest choice.
Problems start when contrast drops:
- Pale colours. Light grey, pastel or metallic ink on white can look stylish but give the camera too little difference to work with.
- Gradients. A gradient across the code means some modules are lighter than others.
- Reversed codes. The standard does describe light modules on a dark background, but not every phone camera reads them reliably. If you want a dark card, put the code on a light panel.
- Glare. Gloss and foil can reflect light into the camera. Matte surfaces scan more reliably.
Think about where people will scan the card. Event halls, bars and restaurants are often dim, and phone cameras struggle more in low light. A code with strong contrast scans in those rooms. A subtle one only scans by the window.
Material matters too. Our PVC cards are matte. On metal cards the code is laser engraved, and on bamboo it is laser marked, so contrast comes from the material itself. Whichever finish you pick, scan a sample before you rely on it. Our guide to QR codes on metal, PVC and bamboo cards compares the three finishes.
Logos and colour inside the code
QR codes have built-in error correction. ISO/IEC 18004:2024 defines four levels, L, M, Q and H, which can recover roughly 7, 15, 25 and 30 per cent of the code respectively. That is what lets a code survive a scratch or a small logo in the middle.
Use that margin carefully:
- A small logo in the centre uses up some of the error correction. Keep it small.
- Never cover or recolour the three large squares in the corners. They are the finder patterns the camera looks for first.
- Keep every module square and solid. Dots, gaps and rounded shapes can look good but scan worse.
If in doubt, leave the code plain. A clean code scans better than a clever one. If you do want a branded code, our guide to custom QR code design with a logo and colours shows what is safe to change.
Where to place the code
Placement is about how people hold the card and the phone.
- Back or front. A code on the back, with your name on the front, works well. People turn the card over naturally.
- Away from edges. Keep the code and its quiet zone well inside the card, clear of the trim.
- The right way up. QR codes scan from any rotation, but a label beneath the code tells people which way to hold the card.
- One code only. Two codes on one card confuse people and cameras.
What to print next to the code is covered in our practical guide to using QR codes on business cards. In short: a few words such as "Scan to save my contact", and your name. Our guide to QR code call-to-action wording has examples for different professions.
Four design mistakes we see most often
A tiny code in a corner. It looks tidy on screen and fails in a dim room. Give the code real space.
Text hugging the code. A website address or a slogan pressed against the edge breaks the quiet zone. Leave the margin empty.
A pale code on a dark card. It matches the brand but many cameras struggle with it. Put the code on a light panel.
A busy background. A photo or pattern behind the code confuses the camera. Keep the area under and around the code plain.
Test before you order
Run this check on a printed proof, not a screen:
- Scan with at least one iPhone and one Android phone.
- Scan in normal light, then in dim light.
- Scan at arm's length and close up.
- Tilt the card slightly and scan again.
- Check that the code opens the right profile, and that the save-contact button works.
If any scan fails, make the code larger, add space around it or raise the contrast. Then test again.
Print-file details such as bleed, file formats and colour modes are outside this guide. For those, use our print file checklist for QR code business cards. If a printed code still fails, our guide to a QR code business card that is not scanning walks through each cause. When you order, the QR code business card page explains the design options, including uploading your own artwork. Our blog has more guides on scanning and sharing.
Frequently asked questions
It is the plain margin around the code. ISO/IEC 18004:2024 requires at least four modules of clear space on every side so the camera can find the code.
Yes, as long as the modules stay dark and the background light. A deep brand colour on white usually works. Pale or metallic colours often do not.
A small logo can work because of error correction, but it uses up part of that safety margin. Keep it small, leave the corner squares untouched and test it.
Some phones read it, some do not. For a dark card, place a dark code on a light panel so it scans reliably.
Either works. Many people put their name on the front and the code on the back, so the code can be larger and the front stays clean.
Print a proof at real size and scan it on several phones, in good and dim light. If it scans first time every time, it is big enough.
No. Error correction helps a code survive damage or a small logo. It does not make tiny modules easier to read. Size, contrast and the quiet zone still decide whether it scans.