Home/Blog/Scanning and sharing
Scanning and sharing 7 min read

QR Codes for Events, Trade Shows and Badges: A Practical Set-up

Short answer

Use one profile QR code everywhere at an event: on your badge, stand graphics, slides, table cards and business cards. Size each code for the distance people will scan from. Put the link you want visitors to use at the top of the profile. If you need their details, add a capture form, then follow up within a day.

By QR Business Cards Editorial TeamPublished Updated

Events are where business cards work hardest. You meet more people in a day than in a normal month, and most conversations last a few minutes. A QR code lets people take your details with them in seconds, even when you are busy with someone else. This guide shows you where to put the code at an event, what it should open and how to turn scans into conversations afterwards.

One profile or separate codes?

The first decision is whether to use one code everywhere or a different code for each event.

One profile, one code. Your business card, badge, stand and slides all open the same profile. Everyone sees your latest details, and you only maintain one page. Because the code is dynamic, you can change what the profile shows before each event without reprinting anything.

Separate codes per event. Some people want a different code for each show, so they can count each one separately. That means more pages to keep up to date and more codes to print correctly. It also splits your numbers across several places.

With our cards, each card's code opens your one profile. For most people that is the better set-up. To compare events, note your profile totals before and after each one, as our guide to QR code scan analytics for business cards explains. If you want event visits to show up in your website analytics, add a campaign tag to the website link on your profile, not to the code.

Where the code goes, and what it should open

PlacementTypical scan distanceWhat to linkNotes
Name badgeAbout 50 cm to 1 metreYour profile with Save contact firstBadges flip round; print the code on both sides
Business cardHand distanceYour profile with Save contact firstThe card people take away and scan later
Table card or tent cardAbout 50 cmYour profile, with a capture form if you use oneStands on the counter where people pause
Stand back wall or bannerAbout 2 to 3 metresYour profile, with the offer or demo link at the topSize up using the distance rule
Presentation slideAcross the roomYour profile, with slides or resources at the topLeave it on screen long enough to scan
Printed handoutHand distanceA resource link on your profileUseful after talks and workshops

Badges

Event badges hang at chest height and spin on their lanyards. A few habits help:

  • Print the code on both sides if you print your own badge insert, so it does not matter which way it faces.
  • Make it as large as the insert allows, with the quiet zone around it.
  • Add a short line, such as "Scan to save my contact", and your name in large type.
  • Watch for plastic sleeves. A glossy badge holder can reflect the hall lights. Tilt the badge if a scan fails, or use a matte sleeve.

If the organiser prints your badge with their own code, that code usually belongs to their system. Keep your own code on your business card and stand.

Stand graphics

People read stand graphics from the aisle, so size matters. Use the 10:1 rule of thumb: make the code about one tenth as wide as the distance people will scan from. Our guide to QR code size for signs and shop windows has a size table, plus advice on lighting and placement height.

Place the code at chest to eye height, near where people stop. Not on the floor-level section of a banner, and not behind your table where your team will stand in front of it. Under the code, print the short domain your profile opens on.

Slides and screens

A code on a slide is scanned from across a room, often in low light. Make it large, put it on a plain light background and leave it on screen for a while. A code on the final slide gets the most scans, because people lift their phones while you take questions. Read the short domain out loud as well, for anyone at the back.

If you show a code on a stand screen, turn the brightness up and keep it still. A code inside a moving video is hard to catch.

Table cards

A small printed card on your counter catches people who want your details but do not want to interrupt your conversation. Give it one clear line, such as "Scan to save our contact" or "Scan to get the brochure", and a code sized for arm's length.

Your business cards still matter

Keep cards in your pocket. People like something to take away, and many will scan later on the train home. A physical card with a QR code also has an NFC chip as a backup on our cards: someone with NFC switched on can tap their phone against it to open the same profile. Our guide to QR code vs NFC business cards explains why QR stays the main route.

Set the profile up for the event

Before the event, open your profile on your own phone and check:

  • The first thing people see is your name, role and Save contact.
  • The top link matches the event: a demo booking, a show offer or the brochure you are handing out.
  • Every link works, and slow pages are removed.
  • Your photo and job title are current.

Change it back afterwards. That is the advantage of a dynamic code: the printed material stays the same.

Capture leads at the stand

A scan on its own only goes one way. Visitors take your details; you get nothing back except a count in your analytics. If you want their details too, you need contact capture.

On our cards, contact capture comes with the Business Add-ons plan only. It adds:

  • A lead capture form on your profile, so a visitor can leave their name and email or number.
  • Enquiry forms and bookings, for visitors who want a call or a demo.
  • A card scanner, so you can scan paper business cards people hand you.
  • CRM and export, so captured contacts move into the tools you already use.

Keep the form short: name, email or phone, and one optional question. Say plainly what you will do with the details, for example "We will email you the brochure and one follow-up". Our guide to capturing contacts from QR business card scans covers form design, consent wording and export.

Follow up within a day

Contacts from an event cool quickly. The day after, people return to their inboxes and forget who they met. Plan your follow-up before the event:

  1. The same evening, add a note to each captured contact: what you talked about and what you promised.
  2. Within a day, send the follow-up you promised: the brochure, the quote or the meeting link.
  3. Keep it personal. Mention the conversation, not just the event.
  4. Export captured contacts into your CRM, with the consent they gave.

If someone only saved your contact and left nothing, you cannot follow up with them. That is fine. Your profile is in their phone, ready for when they need you.

Read the numbers afterwards

After the event, compare your profile views, link clicks and contact saves with the days before. Look at which link people tapped most. If many viewed but few saved, move Save contact higher. If the top link was ignored, change it next time. Treat the numbers as signs of activity, not as a count of people.

Before you order for an event

If you are buying cards for an upcoming event, check the finish, the plan and whether you need contact capture before you order. Our 9 checks before you order list what to compare. See our QR code business cards for finishes and plans, or browse more guides on the blog.

Frequently asked questions

Usually not. One profile code is easier to maintain. Change what the profile shows before each event and compare totals afterwards.

Yes, if you print your own badge insert. Print it on both sides, as large as fits, with a short line saying what opens.

About one tenth of the distance people scan from, as a rule of thumb. For two metres, about 20 cm wide.

With a lead capture form on your profile. On our cards, that comes with the Business Add-ons plan only.

Within a day, while people still remember the conversation. Send what you promised and mention what you talked about.

Yes. Make it large, put it on a light background and leave it on screen long enough, ideally on the final slide.

Yes. People like something to take away, and many scan the card later.

Related guides

View All
Scanning and sharing

QR Code Business Card Contact Capture: Turn a Scan into a Two-Way Exchange

A scan normally shares your details one way. Contact capture lets the other person send theirs back through your profile. How it works, which plan includes it, consent wording and what to do within a day.

Scanning and sharing

QR Code Scan Analytics for Business Cards: What the Numbers Tell You

What your QR business card analytics can and cannot tell you: profile views, link clicks and contact saves, why a scan is not a person, adding UTM parameters to your links, comparing events and acting on the numbers.

Design and print

QR Code Size for Signs and Shop Windows: The Scanning Distance Rule

How big to print your profile QR code on a sign, poster or shop window: the 10:1 distance-to-width rule of thumb, a size table, the right height, light, glass reflections, window decals and a short web address under the code.

Ready to Upgrade Your Networking?

Get your premium QR business card and start making lasting first impressions.

Shop the Full Range