Home/Blog/Design and print
Design and print 7 min read

Custom QR Code with Logo for Your Business Card: Brand It Without Breaking It

Short answer

You can brand a QR code safely if you keep its structure intact. Use a dark brand colour on a light background, keep a centre logo small, and leave the quiet zone, the three corner squares and the dark-on-light contrast alone. Test the code on several phones after every single change.

By QR Business Cards Editorial TeamPublished Updated

A plain black-and-white code works, but it can look out of place on a carefully designed card. Branding the code is possible. The trick is knowing which parts carry your style and which parts the camera depends on. Change the first freely. Leave the second alone.

How a camera reads a QR code

A few parts of the code do the heavy lifting:

  • Finder patterns. The three large squares in the corners. The camera looks for these first to find the code and work out its angle.
  • The quiet zone. The empty margin around the code. The QR code standard, ISO/IEC 18004:2024, requires it to be at least four modules wide on every side.
  • Contrast. The difference between dark modules and the light background.
  • Error correction. Extra data that lets the camera rebuild parts it cannot read.

Everything else is data modules, the small squares that hold your link. Branding works by changing how those modules look, a little, while the structure stays the same.

Design change vs scan risk

Design changeScan riskWhyWhat to do
Dark brand colour on a light backgroundLowContrast stays strongChoose a deep shade; test in dim light
Light or pastel brand colourHighToo little contrastKeep the code dark; use the colour elsewhere
Small logo in the centreLow to mediumUses part of the error correctionKeep it small; raise the correction level
Large logo in the centreHighCovers more than correction can rebuildShrink it or move it outside the code
Rounded or dotted modulesMediumShapes look less like squaresKeep them close to square; test widely
Restyled corner squaresMedium to highFinder patterns are what cameras look for firstKeep them solid, square-cornered and dark
Frame or label outside the quiet zoneLowThe margin stays clearLeave four modules of space inside the frame
Frame inside the quiet zoneHighThe camera loses the edge of the codeMove the frame out
Inverted colours, light on darkMedium to highNot every camera reads them reliablyPut a dark code on a light panel
Gradient across the codeHighSome modules lose contrastUse one solid colour

The rest of this guide explains each row.

Use your brand colour, but keep it dark

The safest brand change is colour. QR codes are built to read as dark modules on a light background, so a dark brand colour works well: a deep navy, a dark green, a burgundy. Put it on white or a pale background.

What to avoid:

  • Light colours for the modules. Pastels, light greys and bright yellows give the camera too little difference to work with.
  • Gradients. A gradient across the code makes some modules lighter than others.
  • Metallic inks. They change with the light and can reflect into the lens.

If your brand colour is light, use it for the frame, the label or the rest of the card, not for the code.

A logo in the centre: how error correction makes room

A logo in the middle of a QR code covers some modules. The code still scans because of error correction. ISO/IEC 18004:2024 defines four levels: L, M, Q and H, which can restore roughly 7, 15, 25 and 30 per cent of the code. A logo uses up some of that margin before the card ever gets a scratch.

Practical rules:

  • Keep the logo small. It should sit in the centre and stay well clear of the corner squares.
  • Choose a higher correction level. H gives the most room for a centre logo. It also adds modules, so the code gets slightly denser.
  • Give the logo a clean edge. A small white border around it stops the logo blending into nearby modules.
  • Do not cover the corners or edges. Logos belong in the middle only.

Remember that the logo spends the margin you would otherwise keep for wear and tear. A logo plus a scratch can be one problem too many.

Rounded modules and dots

Many QR generators offer rounded modules, dots or other shapes. They can look good, and cameras often cope. But every step away from a solid square makes the camera's job a little harder.

If you use them:

  • Prefer slightly rounded squares over small dots with gaps between them.
  • Keep module sizes even. Mixed sizes confuse the camera.
  • Test on older phones too. They tend to be less forgiving.

Frames and labels

A frame around the code, with a short call to action, is one of the best branding moves. It tells people what the code does and makes the card look finished.

The one rule: the frame sits outside the quiet zone. Leave at least four modules of empty space between the code and the frame on every side. What to write in the label is covered in our guide to QR code call-to-action wording.

What you should never change

Some parts of the code are not style. They are how it works.

  1. The quiet zone. Four modules of clear space on every side. No text, frame or pattern inside it.
  2. The finder patterns. Keep the three corner squares solid, square and dark. Do not replace them with logos, circles or icons.
  3. Dark on light. Inverted codes, light modules on a dark background, are allowed by the standard, but not every camera reads them reliably. If your card is dark, put the code on a light panel.
  4. The data. Do not add extra modules, symbols or decorations inside the pattern.

Our guide to QR code design: size, contrast and quiet zone covers these rules in more depth.

Test after every change

Every design change is a new risk, so test after each one, not only at the end.

  1. Export the code at its real printed size.
  2. Scan it on screen with two or three phones.
  3. Print it at real size and scan again.
  4. Try dim light, an angle and arm's length.
  5. Check that the right profile opens.

If a change makes the code slower to scan, undo it. A code that scans first time is worth more than a clever one. Before the full print run, check the artwork against our print file checklist.

Branding beyond the code

You do not have to brand the code itself to make the card look like yours. Often the stronger move is to keep the code plain and brand everything around it:

  • Your logo and colours on the front of the card.
  • A branded frame and label around the code.
  • Your brand colour on the profile the code opens.

Because our cards use a dynamic QR code, the profile behind the code can carry your brand fully, and you can change it at any time without reprinting. The same branded profile can sit behind codes on your boxes and inserts too; see QR codes on packaging and product inserts.

Where our cards fit

Our QR code business cards come in PVC, metal and bamboo, each with a dynamic QR code and an NFC chip as a backup tap. You can choose a custom design option and upload your own artwork. Keep the code's structure intact as described here, and test a proof before you approve it. More guides are on the blog.

Frequently asked questions

Yes, if it is small. Error correction lets the code rebuild the modules the logo covers. Use a high correction level such as H and keep the corner squares clear.

Any dark colour on a light background usually works. Avoid light, pastel and metallic colours for the modules, and avoid gradients.

Usually, if they stay close to square and the same size. Test them on several phones, including an older one.

Avoid it. They are the finder patterns cameras look for first. Keep them solid, square and dark.

Yes, as long as the frame sits outside the quiet zone. Leave at least four modules of empty space between the code and the frame.

After every change. Scan on two or three phones on screen, then on a printed proof at real size.

It can. Each change, from a logo to rounded modules, gives the camera a little more work. If a branded version scans noticeably slower than the plain one in your tests, simplify it.

Related guides

View All

Ready to Upgrade Your Networking?

Get your premium QR business card and start making lasting first impressions.

Shop the Full Range