Home/Blog/Choosing a card
Choosing a card 7 min read

Metal QR Code Business Cards vs PVC and Bamboo: How the Code Reads on Each

Short answer

All three finishes carry the same dynamic QR code, but they read differently. Matte PVC has little glare. Metal feels weighty, and its gold or silver code can reflect light, so tilt it slightly when scanning. Bamboo carries a dark code on natural bamboo, where grain can show through. Test each card when it arrives.

By QR Business Cards Editorial TeamPublished Updated

The finish is the first thing people notice when you hand over a card. It also changes how the QR code reads. This guide covers the three finishes we sell, PVC, metal and bamboo, and what each means for the camera on the other side of the table.

What every finish has in common

Before the differences, the parts that stay the same:

  • The same dynamic QR code. Every card opens your editable profile, so you can change your details without reprinting.
  • An NFC chip as a backup. If a scan fails, a phone with NFC switched on can tap the card instead.
  • The same size. All our cards are 85.6 × 54 mm, the ID-1 size in ISO/IEC 7810:2019, so they fit any wallet or card holder.

What changes is the surface, the colour and the way the code is applied.

The three finishes side by side

FinishColours we sellHow the code appearsContrastGlareFeelBest for
PVCBlack, Green, Brown or BlueA light tone on the dark matte faceGood, light code on darkLow, the surface is matteLight and smoothEveryday use and reliable scanning
MetalBlack & Gold or Black & SilverLaser engraved, gold or silver on black stainless steelGood, light code on darkHigher, metal reflects lightWeighty and coolMaking a strong first impression
BambooWhite Bamboo or Original BambooLaser marked, a dark code on natural bambooGood, dark code on light; strongest on White BambooLow, the bamboo is matteNatural and warmA natural look with a classic dark-on-light code

The table follows our product pages and the photos of each finish. Check the colour you choose on the QR code business card page before you order.

Contrast: which way round is the code?

QR codes were designed as dark modules on a light background. The QR code standard, ISO/IEC 18004:2024, also describes the reverse, light modules on a dark background. Many phone cameras read both, but not every one reads the reversed form reliably, because the camera has to recognise that the colours are swapped.

On our cards:

  • PVC and metal carry a light code on a dark face.
  • Bamboo carries a dark code on pale bamboo, the classic way round.

Neither is wrong. It simply means the other factors, glare and size, matter more on PVC and metal, and grain matters more on bamboo.

PVC: matte, light and low glare

PVC is the lightest of the three. Its matte surface scatters light instead of reflecting it, so there are few bright spots across the code. That makes it the most forgiving finish under ceiling lights or a camera flash.

What to watch for:

  • Dark colours. All four PVC colours are dark, so the code is light on dark. Scan it in dim light during your arrival test.
  • Scratches. A deep scratch across the code can break modules. Keep the card in a holder or wallet slot rather than loose with keys.

Choose PVC if you want the most predictable scan in the widest range of rooms.

Metal: weight, shine and a little care

Metal cards are stainless steel with the code laser engraved in gold or silver. They feel solid and they get noticed. The trade-off is shine. Metal and metallic tones reflect light, and a bright reflection across the code hides modules from the camera.

How to get a clean scan from a metal card:

  • Tilt the card slightly so ceiling lights do not bounce straight into the lens.
  • Avoid scanning under a single bright spotlight. Move a step so the light falls from the side.
  • Wipe off fingerprints. Smears on a shiny surface scatter light across the code.

Choose metal if the impression matters most and you are happy to angle the card when you hand it over.

Bamboo: natural grain, classic contrast

Bamboo cards are natural bamboo with the code laser marked in a dark tone. It is the only finish where the code is dark on light, the way QR codes were first designed.

Two things affect scanning:

  • The shade of the bamboo. White Bamboo is paler, so a dark code stands out more. Original Bamboo is warmer and darker, so contrast is a little lower.
  • The grain. Natural lines run through every card. A strong grain line across the code can look like a row of modules to the camera. Check the area around the code when your cards arrive.

Choose bamboo if you want a natural look with classic contrast, and White Bamboo if scanning in low light matters most.

How you hand the card over matters too

The way you hold the card can help or hurt the scan, whatever the finish.

  • Hold it flat and still. A card that moves in your hand is harder to focus on.
  • Face the code to the other person, not to the ceiling light.
  • Give the camera a second. Most phones read the code as soon as it is steady and whole on screen.
  • With metal, angle it away from the light. A small tilt removes most reflections.

These habits cost nothing and fix many failed scans before they happen.

How to choose a finish for scanning reliability

If reliability is your first concern, use this order of questions:

  1. Where will people scan it? Dim rooms and events favour matte surfaces: PVC or bamboo.
  2. Do you hand it over under bright lights? Shiny metal needs a tilt; matte finishes do not.
  3. Do you want dark on light? Bamboo is the only finish with a dark code on a light face.
  4. How will you carry it? Cards carried loose pick up scratches. Any finish lasts longer in a holder.

Whichever you choose, the code's size and margin matter more than the material. Our guide to QR code design: size, contrast and quiet zone explains those rules, and the print file checklist covers custom artwork.

How to test your card when it arrives

Run this five-minute check before you hand out any card:

  1. Unpack one card and look at the code under normal light. Every module should be crisp, with no smudges, chips or grain lines running through it.
  2. Scan it with your own phone using the built-in camera. Check that your profile opens.
  3. Scan it with a second phone, ideally the other type: iPhone if you have Android, or the reverse.
  4. Try dim light. Turn off the main light or step into a corridor and scan again.
  5. Try the tilt. For metal, find the angle where reflections disappear, so you know how to hold it.
  6. Tap Save contact and check how your details appear in the address book.
  7. Test the NFC backup on a phone with NFC switched on.

If a card fails every phone, our guide to a QR code business card that is not scanning helps you find the cause.

Looking after the code

  • Carry cards in a holder or a wallet slot, not loose.
  • Wipe metal cards with a soft, dry cloth.
  • Keep bamboo cards dry.
  • Retire a card with a deep scratch across the code. Physical cards come with a 12-month warranty against manufacturing defects, as set out in our Terms.

Because the code is dynamic, a new card opens the same profile. Your details stay current whichever card you hand over. More guides are on the blog.

Frequently asked questions

It can, but it needs more care with light. Metal reflects light, so tilt the card slightly and avoid a single bright spotlight. Matte PVC is more forgiving.

On our PVC and metal cards, the code appears in a light tone on a dark face. The QR standard allows this reversed form. Many phone cameras read it, but not all reliably, so test yours with two phones and in dim light when it arrives.

Matte finishes, PVC and bamboo, cause the least glare. Bamboo is the only finish with a dark code on a light face, and White Bamboo gives the most contrast.

It can if a strong grain line runs across the code. Check the code area when your cards arrive and scan each one you plan to rely on.

Yes. Every physical card has an NFC chip that opens the same profile as the QR code.

Yes. The QR code on every finish opens your editable profile, so you can change your details at any time without reprinting.

You can, as long as the logo stays outside the code's quiet zone. On every finish, a clear margin around the code helps the camera find it.

Related guides

View All

Ready to Upgrade Your Networking?

Get your premium QR business card and start making lasting first impressions.

Shop the Full Range