You already have a business card you like. The logo is right, the printer knows the job and you reorder without thinking. You do not need to start again to add a QR code. You need a code that will not go out of date, a place to put it and a file your printer can use. This guide walks through each step.
Step 1: Get a code that stays current
The code you add should open a profile you can edit, not a fixed block of text. That is the difference between a dynamic and a static code. A dynamic code holds a short address. You change what it opens from a dashboard, and every card you have printed shows the new details on the next scan.
Our digital business card gives you exactly that: a profile with your contact details, links and a Save contact button, plus a personal link and a matching QR code image you can download. Nothing is printed or posted by us. You put the code on your own cards, with your own printer.
Our guide to dynamic vs static QR codes explains why a code that holds your details directly ages badly once a phone number changes.
Step 2: Front or back?
Most people add the code to the back. That keeps the face of the card, the part people already know, unchanged. But there are good reasons to choose either side.
| Front placement | Back placement | |
|---|---|---|
| Effect on your current design | You must rearrange or remove items | The front stays as it is |
| Space for the code | Shared with name, logo and details | Usually the whole face, so the code can be larger |
| Chance it gets noticed | High; it is seen at once | Good if you say "Scan the back" or turn the card over as you hand it across |
| Best for | Single-sided cards, or when the scan is the main action | Double-sided cards and brands with a busy front |
| Printing cost | No extra side | A second printed side, if your card was single-sided |
| Room for a label and short domain | Tight | Plenty |
If your card is single-sided today, ask your printer about the cost of printing the back. If that is a problem, use the front and make room as described in step 4.
Step 3: Use a simple layout grid
A grid stops the code from looking stuck on. Open your existing artwork and try this:
- Split the face into thirds across the width. On the back, the code can sit in the middle third, with a short label above it and your domain below it.
- On the front, give the code one third. Keep your name and logo in the other two thirds. Line the code up with an edge of your text block, not with the card's corner.
- Keep the safe area. Leave the margin your printer asks for between the code and the trim. A code too near the edge can be cut into.
- Leave the quiet zone empty. The code needs a plain margin, four modules wide on every side, as set by ISO/IEC 18004:2024. Nothing goes inside it: no text, no rule, no pattern.
Make the code as large as the grid allows. Our guide to QR code design: size, contrast and quiet zone explains why a bigger, simpler code scans more easily.
Step 4: What to remove to make room
The code is a doorway to everything you could not fit on the card. So you can take things off the card and put them on your profile instead. Good candidates:
- A second or third phone number. Keep the one you answer. Put the rest on the profile.
- A fax number. Few people use one now.
- Your full postal address. A town or area is often enough on the card. The full address can sit on the profile with a map link.
- A row of social media icons. One line of icons takes a lot of space and says little. Your profile can list every channel as a tap-to-open link.
- A long slogan or service list. Your profile has room for detail. The card needs your name, role, one way to reach you and the code.
What should stay: your name, your role or business, your logo and at least one direct way to contact you. Someone who never scans should still know who you are.
Step 5: Add a label and a short domain
A bare code makes people guess. Print a short line next to it that says what opens, such as "Scan to save my contact". Under the code, print the domain your profile opens on, in small but readable type. It tells people where the link goes and gives them a fallback if their camera will not scan.
Our guide to QR code call-to-action wording has example lines for different professions and the mistakes to avoid.
Step 6: Keep the code dark on light
Your existing card may use a dark background or a strong brand colour. The code still needs to read as dark modules on a light background. If your card face is dark, put the code on a light panel. Do not invert the code to light on dark just to match the design; many cameras struggle with that. Leave out gradients, photos and tints behind the code.
Step 7: Hand the file to your printer
Your printer needs the code in a form that stays sharp. Before you send the artwork:
- Place the code at its final size. Do not scale a small image up in the layout.
- Check the file you downloaded. If it is a vector file, keep it as vector art. If it is a raster image such as a PNG, place it at final size and make sure each module is a whole number of pixels, with no smoothing.
- Export a print PDF with the bleed and crop marks your printer asks for.
- Mention the code in your note to the printer. Ask them not to resize, recolour or sharpen it.
Our print file checklist goes through file types, error correction, bleed and proof checks in detail.
Step 8: Test a proof before the full run
Ask for a printed proof at real size, ideally on the same stock. Then scan it:
- With an iPhone and an Android phone, plus one older phone if you can borrow it.
- At arm's length, in normal indoor light.
- In a dim corner, the way a busy event feels.
Each scan should open your profile and Save contact should work. If anyone you meet struggles, you can send them our guide on how to scan a QR code business card on iPhone or Android.
Keep the profile up to date
The code does not change, but the profile behind it can. That is the point. When your number, role or links change, update the profile and leave the cards alone. Check the profile on your own phone after each edit. A broken link on the profile looks like a broken card.
When a ready-made card makes more sense
Adding a code to your existing paper card is the cheapest route if you already print cards. If you would rather have a finished card with the code built in, our printed QR code business cards come in PVC, metal or bamboo, linked to the same kind of profile. Our guide to 9 checks before you order helps you compare options. More guides are on the blog.
Frequently asked questions
Not cleanly to printed stock. You can use a sticker, but it looks temporary. Add the code to the artwork and use it for your next print run.
The back, if you can. It keeps the front unchanged and gives the code more room. Use the front on single-sided cards.
From your digital card profile. It comes with a personal link and a matching QR code image you can download and place in your artwork.
Extra phone numbers, a fax number, the full address, rows of social icons and long service lists. Put them on your profile instead.
A print PDF with the code placed at final size, plus the bleed your printer asks for. Ask them not to resize or recolour the code.
Yes. It is a dynamic code, so you update the profile and every card opens the new details.
It helps. Print a short line such as "Scan the back to save my contact" on the front, or turn the card over as you hand it across.