Your business card is not the only thing customers hold. A small business also sends out boxes, labels, thank-you notes and swing tags. Each one can carry the same QR code as your card and open the same profile. That gives customers one easy way back to you, and gives you one place to keep up to date.
This guide covers where the code fits, how big to make it on each surface, how curves and finishes affect it, and what the scan should open.
Why use your card's code on packaging
A dynamic profile code is not tied to paper. It holds a short address that opens your profile, and you decide what the profile shows. Put the same code on your packaging and you get three benefits:
- One code to manage. Change a link on your profile and every box, insert and card already out there opens the new version.
- No reprint when details change. A new phone number or website does not mean binning a roll of labels.
- One set of numbers. Your profile analytics count views, link clicks and contact saves from every copy of the code together.
If you sell from a stall, a studio or online, the code turns each parcel into a way to reach you again.
Where the code works on packaging
Think about where the customer's attention is when they open the parcel:
- Thank-you insert. Often the best spot. It is flat, read at hand distance and expected to say something personal.
- Product label. Good for things that stay on a shelf, such as candles, cosmetics or food, where people come back to them.
- Swing tag. Ideal for clothes and handmade goods. The tag often stays after the item is used.
- Inside the box lid. Seen at the moment of opening. A plain lid gives you a clean light background.
- Outer box or mailer. Useful, but it gets scuffed, taped over and thrown away first.
- Seal sticker. Small, so keep the code simple and the link short.
Suggested minimum sizes by surface
There is no single official size for a QR code on packaging. The QR code standard, ISO/IEC 18004:2024, defines how a code is built, not how big to print it. The sizes below are our rule-of-thumb starting points for a short link and a short reading distance. They are guidance, not a standard, so always test a printed sample.
| Surface | Suggested minimum code width | Tips |
|---|---|---|
| Thank-you insert or postcard | About 2.5 cm | Flat and read close; put the line "Scan to reorder" or similar beside it |
| Swing tag | About 2 cm | Print on the plainer side of the tag; keep the hole punch well clear of the code |
| Flat product label | About 2 cm | Keep the code off folds and seams; leave a light margin all round |
| Jar, bottle or tube | About 2.5 cm, on the flattest part | A tight curve bends the code away from the camera; test on the real container |
| Inside the box lid | About 3 cm | A plain lid gives good contrast; avoid placing it where tape will go |
| Outer box or mailer | About 4 cm or more | Read from further away and often scuffed; size up and protect it from tape |
| Seal sticker | About 2 cm | Small, so use a short link and avoid a logo in the code |
Size includes the code only. Add the four-module quiet zone around it on every side. If the code will be read from further away, such as a box on a shelf across a room, use the distance rule in our guide to QR code size for signs and shop windows.
Curved surfaces
A QR code is read as a flat grid. On a curved surface, the modules near the edges bend away from the camera and look narrower. A few habits help:
- Use the flattest area. On a bottle, that may be the shoulder or the cap. On a jar, the lid is often flatter than the side.
- Keep the code small relative to the curve. A code that wraps far around a narrow tube is harder to read than one that sits on a gentle curve.
- Turn the code so the curve runs one way. On a bottle, the code is curved left to right but flat top to bottom, which most cameras cope with.
- Test on the real container. A flat proof tells you little about a curved one. Stick a printed label on and scan it from a normal distance.
Finishes and materials
Packaging comes in finishes that business cards rarely use. Each one changes how the code reads:
- Gloss lamination and varnish. They shine under shop lights and phone torches. A bright spot across the code hides modules. Choose matte where the code sits, or leave the code area unvarnished.
- Kraft and brown card. It looks good, but contrast is lower. Print the code on a white label or a white printed patch, then place it on the kraft.
- Clear labels. The background shows through. On a dark product, a clear label leaves the code dark on dark. Use a white or opaque label.
- Foil, metallic ink and embossing. Lovely for logos, poor for codes. Keep the code in a flat, solid dark ink.
- Textured paper. Fine at larger sizes. At small sizes, the texture can break up module edges.
The same rules apply as on your card: a dark code on a light background, nothing behind it and an empty quiet zone. Our guide to custom QR code design with a logo and colours covers which brand touches are safe.
What the scan should open for a customer
A customer who scans packaging wants something different from a contact at a networking event. They already bought from you. Put the links they are most likely to need at the top of your profile:
- Your shop or reorder page. The most useful link for repeat customers.
- Care or usage instructions. A short document or page, especially for skincare, food or handmade items.
- How to contact you. A phone number, email or WhatsApp link for questions and custom orders.
- Your social channels. For customers who want to follow new products.
- Save contact. Useful for trade buyers and stockists, who may want your details in their phone.
Because the code is dynamic, you can change the order whenever you like. Put a seasonal collection at the top for a month, then switch back. The printed packaging stays the same.
If you take custom orders, a booking calendar or enquiry form on the profile can collect requests. On our profiles, bookings and enquiry forms come with the Business Add-ons plan only.
Print a line next to the code
A bare code on a box looks like a barcode for the courier. Tell people what it is for:
- "Scan to reorder"
- "Scan for care instructions"
- "Scan to see the full range"
- "Scan to save our contact"
Make the promise true. If the line says "reorder", the first link on your profile should be your shop. Under the code, print your short domain so customers can see where it goes.
Prepare the file
Packaging is often printed by a different supplier from your cards. Send them the code as a vector file if you have one, or as a raster image at final size if not. Ask them not to resize or recolour it. Our print file checklist explains file types, error correction and proof checks.
Test the way a customer would
Before you print a large batch, make one finished sample and scan it:
- On an iPhone and an Android phone.
- Under a kitchen light, where most parcels get opened.
- From the distance a customer would hold it.
Check that the right link is at the top of the profile. If a customer ever asks how to scan, point them to our guide on how to scan a QR code business card on iPhone or Android. The steps are the same for packaging.
Where our cards fit
Our digital business card gives you an editable profile with a personal link and a downloadable QR code to place on your own packaging, labels and inserts. Nothing is printed or posted by us. If you also want a printed card, our QR code business cards link to the same profile. More guides on design and printing are on the blog.
Frequently asked questions
Yes. If it is a dynamic profile code, the same code works on boxes, labels, inserts and swing tags and opens the same profile.
As a rule of thumb, about 2 cm wide for a flat label read close up, plus the quiet zone. Test a printed sample before you order.
Usually, if it sits on the flattest part and is not too large for the curve. Test it on the real container.
Yes, but contrast is lower. Print the code on a white patch or label for reliable scans.
The link they need most: often your shop or reorder page, then care instructions, contact details and social channels.
Not with a dynamic profile. One code can open your profile, and you can reorder the links on it at any time.